|
Glory Hydraulic Stackers:
Rigid Mast
Stackers:
Rigid
Mast Stackers are
light weight machines, ideals for tool handling general stores
work, and vehicle loading for loads upto 300 kgs and 1000
kgs. They are generally short, in height and being light in
weight can easily manoeuvered through tight space, and low
doorframe. They are available for lifting heights of 1200mm and 1800mm.
Telescopic
Mast Stackers:
Are useful heavy duty
stackers deal for handling pallets and heavy duty components
where higher lifts are required but the closed heights be
such that the equipment passes easily under door frames beams
and arches etc. Hera the inner mast telescropes into the outer
mast therby considerably. They are available for lifting
heights of 2000mm, 2500mm, 3000mm, 2500mm and 4000mm.
General
Construction:
Guide
sections are made of reinforced hot rolled steel channels,
mounted on rigidly fabricated base frames. Twin heavy duty
adjustable, leaf/Roller chains are fitted to provide load
stability. Large dameter wheels and castors, running on ball
bearing, assist easy movemant. The equipment is fitted with a
frame type handle for precisn location all stackers are
designed for loading the into capacity of the equipment at a
load center of 500mm load having a load center of more than
500mm derate the capacity of the stacker substantially.
Hydraulic
System:
The Hydraulic
system consists of an oil tank, pump cylinder manifold plate
and hydraulic cylinder the oil tank is welded to the manifold
plate. The hydraulic pump is a positive displacement.
The manifold plate is fitted with a plunger cylinder a release
valve
assembly and a suction valve with a built in filter. The
delivery part of the pump is connected to the hydraulic
cylinder through a standard hosepipe. The piston in the
hydraulic cylinder is hard chromeplated to protect it from
corrosion and rust. Additionally a wiper seal protects the
hydraulic cylinder from the ingress of dust and dirt.
Operation:
The Operation of the
equipment is simple. Here the hydraulic cylinder is actuated
by working the ram pump handle an up-down pumping action.
Lower done by turning the relese knob in the anti-clockwise
direction, and can be adjusted to very fine limits, to ensure
exact positioning of the load.
Electro
Hydraulic System:
The
motor is energised by a microswitch, through a Contactor
actuated by the control valve lever thus ensuring running of
the motor only while liting. Lowering is done by the same
lever, pushed in the opposite side and the stacker comes down
of their own weight. A limit switch stops the motor when the
fork carriage reaches its full lift. A manual hydraulic pump
can be fitted on request alongwith the electro hydraulicsystem,
for use in case of electrical failure.
Wheels:
Cast iron wheel are mounted on antifriction bearing of
following size:
a) Wrapover stacker:
2 Nos. Trial wheels of size
83x75mm
2 Nos. Front wheels of size
150/200x50mm.
b) Straddle stacker:
2 Nos. Trial wheels of size
150x50mm
2 Nos. Front wheels of size 200
150x50mm
(Nylon wheels are available on
reques)
Safety
Features:
- Over load protection
mechanical and electrical.
- Flow control valve in case of
house faiture.
- Variable speed for lifting and lowering. (With lever control only).
|
